Gefen DVI Dual Link over 2CAT6 Extender

rating Gefen DVI Dual Link over 2CAT6 Extender (1 đánh giá | Gửi đánh giá)
Mã sản phẩm
0
Tình trạng
Còn hàng
Bảo hành
0
Tóm tắt sản phẩm
Giá bán
Giá liên hệ
Chi tiết sản phẩm Thông số kỹ thuật Đánh giá Download tài liệu

 

Extend Dual Link DVI over two CAT-6 cables

The DVI Dual Link over 2CAT6 extends any DVI dual link source, to a display up to 200 feet (60 meters) away at resolutions to 2560x1600 using two CAT-6 cables. Extending dual link resolutions over standard DVI cables have a limitation of 15 feet. Exceeding this distance requires additional repeaters and/or boosters. The DVI Dual Link over 2CAT6 Extender provides an easy to install solution, using CAT-6 cables. This product also extends RS-232 using the same CAT-6 cable, allowing access and control of devices using RS-232.

How It Works

Place the DVI Dual Link over 2CAT6 Extender Sender Unit next to the computer source. Use the included DVI cable to connect the computer to the Sender Unit. Connect the Receiver Unit to the display with a DVI dual link cable. Connect an RS-232 serial cable from the RS-232 port on the Sender Unit to the RS-232 control device. Connect the RS-232 port on the Receiver Unit to the RS-232 device. Use two CAT-6 cables, up to 200 feet (60 meters), to connect the Sender Unit to the Receiver Unit. Connect the included locking power supplies to the Sender Unit and Receiver Unit, and then connect both power cables to available electrical outlets.

Note:  This product supports HDCP pass-through only when using single link resolutions.

 wd_EXT-DVI-2CAT6DL.png

Features:

  • Extends dual link DVI and RS-232 up to 200 feet (60 meters) over two CAT-6a cables
  • Supports dual link resolutions up to 2560 x 1600
  • EDID Management for Local and Pass-through modes
  • Locking Power Supplies
  • Rack-mountable with Gefen EXT-RACK-1U Rack Tray