Kramer VM-9S

Overview

The CVG-9S is a useful line driver made to increase signal levels for long cable runs of both video and audio. It's specifications make it a good match for schools, hospitals, CCTV and security systems. A great desktop unit, it can easily be adapted to a studio rack mount using optional equipment.

Level AdjustmentFront panel controls give the user the opportunity to compensate for long cable runs by increasing the audio, video and HF levels.Distribution CapabilitiesThis unit has the ability to be used as a 1x2 distribution amplifier and also has a loop through that will pass the signal to other equipment and is not effected by the level controls.AdaptabilityA desktop sized line driver that will fit into small areas and yet with rack adapter RK-MED it will fit very nicely into a standard studio rack space.

Specifications

Input	One composite video (looping), 1 Vpp @ 75 ohms, On a BNC connector One stereo audio (looping), 1 Vpp @ 25K ohms, On two RCA connectors
Output	Two composite video, 1 Vpp @ 75 ohms, On BNC connectors Two stereo audio, 1 Vpp @ 100 ohms, On four RCA connectors
Video Bandwidth	84 MHz -3 dB
Video Signal-to-Noise Ratio	74 dB
Differential Phase	0.5°
Differential Gain	0.2%
Video Control	Level: 0 to +8 dB, front panel HF: ( #'s Not Specified), front panel 75 ohm termination switch, rear panel
Coupling	Video: DC Audio: AC
Audio Bandwidth	25 kHz -1 dB
Signal to Noise Ratio	Not Specified by Manufacturer
Audio THD	0.03%
Audio Control	Level: 0 to +8 dB
Dimensions	9.6 x 7 x 1.7" (WxDxH) 24.5 x 18 x 4.5cm (WxDxH)
Weight	2.6 lbs 1.2 kg
Power Source	115 VAC 60 Hz 230 VAC 50 Hz