Kramer VP-26

Overview

The Comprehensive/Kramer VP-26 is a multi-format presentation switcher. It switches 4x2 composite, 4x2 S-Video, 2x2 component and a 4x2 graphics video switcher with corresponding balanced stereo audio switching capability with each video input.

ApplicationThis device is designed for presentation applications where a variety of input formats need to be accessed and switched in a glitch-free fashion.HDTVThis device has the bandwidth and input format capability to pass HDTV signals.MicrophoneThe microphone input offers level control and may be activated by a talkover button for live narration during video presentation.Audio AmplifierFor room or master control monitoring a 5 watt per channel amplifier with speaker output is offered.Remote OptionsThis device can be remote controlled by IR, RS-485, RS-232 and Ethernet.Worldwide Power SupplyA universal power supply is offered for operation in most countries without extraneous power converter.

Specifications

Input	Composite Video x4, 1 Vpp @ 75 ohms, on BNC connectors Graphics Video x4, up to UXGA, on HD-15 connectors Y/C S-Video x4, 1 Vpp Y, 0.3 Vpp C, on 4-pin connectors Component Video x2, YPbPr, on RCA connectors Balanced Stereo Audio x14, @ 50K ohm, on terminal block connectors Mic Input, @ 10K ohms, on an XLR connector Ethernet, on an RJ-45 connector RS-232, on a 9-Pin connector RS-485, on terminal block connectors
Output	Composite Video x2, 1 Vpp @ 75 ohms, on BNC connectors Graphics Video x2, up to UXGA, on HD-15 connectors Y/C S-Video x2, 1 Vpp Y, 0.3 Vpp C, on 4-pin connectors Component Video x2, YPbPr, on RCA connectors Balanced Stereo Audio x9, @ 50K ohm, on terminal block connectors Line Out, on a Cat5 connector Master Stereo Audio, @ 150 ohms, on a terminal block Stereo Speaker Output, 5 watts rms @ 4 ohms, on a terminal block
Switch Type	Matrix, front panel selectors with take Remote via IR, RS-232 and RS-485
Video Bandwidth	Graphics 300 MHz Y/C 320 MHz CV 420 MHz Cat5 up to UXGA
Differential Gain	Graphics 0.15% Y/C 0.03% CV 0.02% Cat5 6.4%
Differential Phase	Graphics 0.09° Y/C 0.03° CV 0.03° Cat5 0.2°
Video Signal-to-Noise Ratio	75dB
Audio Bandwidth	46KHz
Signal to Noise Ratio	74dB
Audio THD	0.008%
Control	Front Panel Touch Switches Remote via IR, RS-232 and RS-485 Sync Selector rear panel
Power Source	100 to 240VAC, 47 to 63Hz
Dimensions (WxDxH)	19 x 7 x 3.5" 48.26 x 17.78 x 8.9cm
Weight	8.4 lbs 3.8kg